Mevlana Tea
Stages of Tea Production
Withering:
Withering is the process of reducing the moisture content of fresh tea leaves from 70–80% to 50–55% and is the most important initial stage in the production of fermented tea (black tea). Withering is carried out in withering troughs. The withering time of the tea in the troughs varies depending on the freshness and moisture content of the fresh tea, as well as the weather and working conditions.
The air temperature supplied to the troughs is set not to exceed 38°C at low altitudes and 32°C in high-altitude regions. Excessive heat causes the leaves to dry out and burn. Since rolling and fermentation will not proceed as desired in dried and burnt tea, the quality of the resulting tea will be extremely low.
Rolling:
Rolling is the process of breaking, crushing, and bending withered tea leaves in various tea-making machines to spread the cellular sap over the surface of the rolled leaves and initiate oxidation. It takes place in two stages:
First Rolling: This rolling process is carried out in flat (leaf) rolling machines. Since flat rollers are filled slowly over a long period, they can hold at least 300 kg of withered leaves. The rolling time is at least 45 minutes from the start of filling.
Second Rolling: This is carried out to ensure that coarse leaves that were not sufficiently broken during the first rolling are further broken in pressed rollers or disc rollers, thereby rupturing the cell membranes of the leaves and releasing the cellular sap to create better conditions for fermentation.
The rolling time in pressed rollers is 40 minutes, and in disc rollers, it is 20 minutes. The tea in pressed rollers is pressed at least 3 times during this period. The presses are applied with a pressure of 200–300 pounds (90–135 kg). The machine is operated for 5–6 minutes with pressure and then for 5–6 minutes without pressure. This reduces the heat of the tea that has warmed up due to excessive friction during pressing. The tea removed from the second rolling is transferred to the fermentation unit.
Fermentation:
Fermentation is the process by which the chemical compounds in the cellular sap of the rolled fresh tea leaves undergo biological changes under the action of oxidase enzymes, creating the desired color, astringency, brightness, aroma, and flavor in black tea. The first quality control in tea production is carried out during the fermentation stage. At this time, information is obtained about the rolling and withering condition of the tea.
When referring to the fermentation period, one should not think of the time the tea spends in the fermentation section. This period is the time from the start of rolling until oxidation is complete. During fermentation, the relative humidity should be maintained at approximately 90–95%. The temperature varies between 21 and 32°C depending on weather conditions. The brightness and vibrancy of the tea liquor increase with oxidation carried out at low temperatures. As the temperature increases, vibrancy decreases, and a dull, flat color is formed.
Drying:
This is the process of baking rolled and fermented tea leaves to reduce their moisture content to 2–4%. The purpose of drying is to create an environment that stops enzyme oxidation and prevents the loss of the acquired properties and formed substances, and to make the tea storable, packable, and transportable.
The inlet temperature during drying is between 90 and 100°C, and the outlet temperature is between 45 and 60°C. The outlet temperatures may vary depending on the different hood systems.
The temperature of the air entering the oven, the flow rate, the thickness of the leaves on the pallet, and the time the tea stays in the oven affect the drying process.
There are mainly two settings in the ovens:
The first is the pallet thickness setting, which allows the tea to be spread in thin and thick layers.
The second is the speed (belt-and-pulley or variator) setting, which determines the time the tea stays in the oven.
Fermented tea supplied to the oven is removed from the oven in Marshall-type ovens in 32 minutes on the 1st belt, 27 minutes on the 2nd belt, 21 minutes on the 3rd belt, 17 minutes on the 4th belt, and 12 minutes on the 5th belt.
Grading and Packaging:
This is the process of separating the dry tea coming out of the oven according to fineness, thickness, and quality by passing it through pre-determined standard sieve wires.
Both at the oven outlet and during various stages of grading, the dried tea is passed through fiber catchers to separate fibers and tea dust. After the tea is baked and removed, it can only be properly graded with its 2–4% moisture content. Since the moisture content of tea that is left unattended and not properly stored increases and it gains elasticity, it cannot be properly graded and quickly becomes moldy and harmful to health.